Alarm Setting - TFA 60.2502 Instrucciones Para El Manejo

TFA_No. 60.2502 Anleitung
Radio controlled alarm clock with thermometer

4.2 Alarm setting

• Select your desired alarm by "MODE" button:
• Alarm 1
• Alarm 2
• Set the alarm time in the desired alarm mode. Hold "MODE"
button for 3 seconds. The hour digits are flashing.
• Press " " or " " button to adjust the time. Confirm with
"MODE" button. Set minutes in the same way. Confirm with
"MODE" button and the alarm is activated.
• If necessary, adjust the second alarm in the same way.
• To activate or deactivate the alarm function press "ALARM"
button. , , and
the LCD.
• Once the alarm starts to ring, you can stop the alarm by
pressing "ALARM" button.
• You can activate the snooze function by pressing the "LIGHT/
SNOOZE" button on the top. Zz appears and the alarm will be
interrupted for 4 minutes.
4.3 Dual time setting
• Select dual time by "MODE" button:
• Hold "MODE" button for 3 seconds. The hour digits are flash-
ing. Press " " or " " button to adjust the time. Confirm with
"MODE" button. Set minutes in the same way. Confirm with
"MODE" button.
5. Manual time setting with time zone
• The time zone is used for the countries where the DCF signal can
be received but the time zone is different from the DCF time.
• Hold " " button in normal mode (time/temperature display)
and "F" appears on the display.
• Hold "MODE" button and the hour indicator is flashing.
14
22.02.2009 11:59 Uhr
or no alarm symbol is shown on
Seite 8
Radio controlled alarm clock with thermometer
• Press " " or " " button to adjust hours.
• Press "MODE" button to confirm it.
• Holding " " or " " buttons, you will enter fast mode.
• Hold " " button in normal mode (time/temperature display)
to change between DCF-Time and time zone (Display "F").
6. Backlight
• Press "SNOOZE/LIGHT" button. The backlight will light for
5 seconds.
• The backlight switches on automatically at dark.
7. °C/°F Button
• Press "°C/°F" button to toggle between °C or °F as tempera-
ture unit.
8. Battery replacement
• Replace the batteries when the display becomes weak.
• Use alkaline batteries only. Observe correct polarity. Low bat-
teries should be changed soon to avoid the damage resulting
from a leaking battery. Batteries contain harmful acids. Wear
protective glasses and gloves when handling with leaked bat-
teries.
Attention: Please do not dispose of old electronic devices and
empty batteries in household waste. To protect the environ-
ment, take them to your retail store or to appropriate collec-
tion sites according to national or local regulations.
9. Maintenance
• Keep the instrument in a dry place.
• Do not expose the instrument to extreme temperatures, vibra-
tion or shock.
• Clean it with a soft damp cloth. Do not use solvents or scour-
ing agents.
15