Domo DO466GO Manual De Instrucciones página 31

www.domo-elektro.be
cool before putting on or taking off parts, and
before cleaning the appliance.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
• CAUTION: In order to avoid a hazard this
appliance must not be supplied through an
external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
• The door or the outer surface may get hot
when the appliance is operating.
• The surfaces of the appliance are likely to
get hot during use. It is advised not to touch
the surfaces of the appliance other than the
handles to avoid burns.
• Never leave the appliance unattended while it is functioning.
• Do not use or store this appliance outdoors.
• Do not move the appliance while in use or when still hot. Allow to cool before
moving the appliance.
• Do not use this appliance for other than intended use.
• Check carefully that the voltage and frequency of the power net match the
indications on the rating label of the appliance.
• The plug must be plugged into an appropriate outlet that is installed and grounded
in accordance with all local standards and requirements.
• Only use the utensils delivered with the appliance.
• Do not operate this appliance with a damaged cord or plug or in the event the
31
DO466GO