Operating Information; Instructions For Use - Bair Paws 875 Manual Del Operador

Operating Information

Instructions for Use

The instructions below describe how to use the Bair Paws
Model 875 warming unit with a Bair Paws gown� For more
information about the Bair Paws warming gowns, refer to the
Instructions for Use that is shipped with the warming gowns�
1� Instruct your patient to put the warming gown on so the
opening is in the back� The gown has ties on the side and
back of the neck� The gown should be tied loosely to help
the air circulate in the gown insert�
2� Connect the warming unit hose to the warming gown
by performing the following steps�
a� Squeeze and hold the two buttons on
the sides of the hose nozzle�
b� Insert the nozzle into the properly sized hose
port in the warming gown� Refer to the
Instructions for Use that is shipped with the
warming gowns for hose port location�
c� Release the buttons to lock the hose nozzle in place�
3� Connect the warming unit to a proper power source�
4� Turn the knob on the temperature
controller clockwise to turn the warming
unit ON� When you turn the warming unit on, the
heater and blower activate� Also, the "Power On"
indicator light on the warming unit illuminates�
5� Allow the patient to adjust the temperature to a
comfortable level� The temperature and airflow are
adjusted by turning the knob on the temperature
controller� The temperature adjustment varies from
approximately ambient to 43±3˚C�
Arizant Healthcare Inc�
7