Hold Mode / Count Mode; Setting Parameters - Crivit H14347 Instrucciones De Utilización Y De Seguridad

All manuals and user guides at all-guides.com
function. Otherwise the functions of the
pedometer cannot be used properly.
Note: After you have set all the parameters
before using it for the first time, you can
change the parameters at any time. The only
thing you cannot change at a later date is the
unit of measurement (metric or US system). If
you wish to change the unit of measurement,
you will have to remove all the batteries
from the battery compartment
RESET button . This process resets the preset
12
values again.

Hold mode / count mode

Q
When you start the device, the pedometer is
automatically in count mode.
Note: In hold mode the measuring func-
tions of the pedometer are disabled.
j
P ress and hold the MODE button
about 3 seconds. An acoustic signal will
sound. The display
nately with the number of the steps.
j
P ress and hold the MODE button
approx. 3 seconds to enter count
mode. You will hear a signal.
appears.

Setting parameters

Q
j
W hen you start to operate the device for
the first time or switch the device to hold
mode (see "Hold mode/counting mode"),
you can set or change various parameters.
j
T o do so, press the SET button
to set mode. The word "SET" will light
up in the LC display.
j
T he indicators kg, cm, km or lb, inch, mile
flash. Press the buttons MODE
j
,
10 11
or press the
13
j
for
3
will flash alter-
j
for
3
dis-
j
, to get
2
j
16
3
or CLEAR to set the desired unit of
5
measurement (metric or US system).
C onfirm your entry by pressing the SET
button . The word STRIDE will appear
2
in the function bar
14
and the preset value 60 cm / 25 inch flash
in the LC display. Press the buttons MODE
or CLEAR in order to set the de-
3 5
sired length of your stride.
Note: You can specify a stride length of
between 30 to 200 cm / 10 to 80 inch.
tip: Press the MODE
button for about 3 seconds. This will speed
up the process of setting the values. You
can use this fast way of setting the param-
eters for the setting procedures that follow.
C onfirm the entry by pressing the SET
button . The word WEIGHT will appear
2
in the functionbar . The kg symbol
14
and the preset value 60 kg / 120 lb flash
in the LC display. Press the buttons MODE
or CLEAR to set the desired weight.
3 5
Note: You can specify a weight of
between 30 to 200 kg / 60 to 400 lb.
C onfirm the entry by pressing the SET
button . The word HEIGHT will appear
2
in the function bar
14
flashes in the LC Display. Press the MODE
or CLEAR button to enter the desired
3 5
value.
Note: A value between 60 and 250 cm /
20 and 100 inch can be entered.
C onfirm your settings by pressing the
SET button . The LC display shows the
2
AGE indicator and the number 18 as
29
the preset value. Press the MODE
CLEAR button to enter the desired age.
5
Note: Any age between 5 and 99 years
can be entered.
C onfirm the entry by pressing the SET
button . The words MAN or WOMAN
2
will light up. Press the buttons MODE
Getting started
. The cm symbol
16
or CLEAR
3 5
16
. The preset value
or
3
3
GB/MT 43