Veridian Healthcare 11-50DP Guia De Inicio Rapido

Pulse Ox Fit
Tracking Software
For use with Pulse Oximeter Models:
11-50DP, 11-50E
The Pulse Ox Fit Tracking Software allows you to real-time
monitor pulse oxygen measurements, save those
measurements and store previously recorded measurement
sessions from your device.
This software is included on the enclosed mini-disc, or can
be downloaded at:
www.veridianhealthcare.com/pulseoxdownload
SYSTEM REQUIREMENTS:
• IBM Compatible
• Windows XP, VISTA, 7(32bits)
• Mini USB Communications Port
• 16MB Memory
• 10MB Free Space on Hard Drive
Software Installation
Insert the software mini disc or visit
www.veridianhealthcare.com/pulseoxdownload and follow
the on-screen instructions to install your software.
The following icons will appear as shortcuts on the desktop:
Select SpO2 for real-time monitoring; select SpO2 Review
to download a saved recording from the device
IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING DIFFICULTIES, PLEASE CALL THE
TOLL FREE CUSTOMER SERVICE HELP LINE FOR FURTHER ASSISTANCE AT 1 866 326 1313.
SpO2 Real-Time Monitoring
1. Connect the USB cable to an open
port on your PC and to the Pulse
Oximeter.
2. Launch the SpO2 software. Follow the onscreen prompts
select the desired language.
3. The live-read screen will automatically launch as a single
user live-read. Up to four users can be tracked at a time.
4 User Live-Monitoring Display
Select which user—1 thru 4—to Select duration for trend-
view, or select to view all live time view in minutes—
feed displays at once. 1, 10, 30 or 60.
Input data information for the
patient being monitored.
SpO2 Review of Recorded Measurements from
Pulse Oximeter
1. Connect the USB cable to an open port on your PC
and to the Pulse Oximeter.
2. Launch the SpO2 review software. Follow the
onscreen prompts select the desired language.
3. A 'new session' dialogue box will show on the
display, similar to the 'Information' from the previous
section.
Select the device type and COM connection.
11-50E - COMxxx
11-50DP - COMxxx
4. The data from the device will automatically be
displayed. If you have already input the information,
this data will automatically be saved in the data
directory.
Review of Saved Measurements
The saved measurement date from real-time
monitoring and recorded measurements can be saved
and stored on your PC. To review the measurements:
1. Connect the USB cable to an open port on your PC
and to the Pulse Oximeter.
2. Launch the SpO2 review software.
3. Click on the magnifying glass icon, then select the
review button at the top of the screen.
4. Select the desired measurement for review.
Printing Saved Measurements
Four reports are available for printing: Summary,
Full Study, Oximetry and Strip Chart. Use the printer
Print selection
icon on the bottom right to print the desired report
following the on-screen prompts.
#93-8007 12/11
©2011 Veridian Healthcare