Motorola NNYN4846 Manual Del Propietário página 12

All manuals and user guides at all-guides.com
Figure 4. External Speaker Installation Location
Carry out the following procedure (refer to figure 5):
1. Make sure that the speaker has enough clearance when mounted.
2. Make sure that there is enough clearance on the opposite side before
drilling.
3. Using the trunnion bracket as a template, drill the necessary mounting holes
and secure the bracket with the provided self-tapping screws.
4. Position the speaker on the trunnion bracket and secure it using the
provided wing screws.
5. Route the speaker cable to avoid physical damage or visual obstruction.
Allow sufficient slack in the connector end of the cable to reach the
Junction Box (see Figure 2, Junction Box Installation).
6. Plug the speaker cable into the junction box (see Figure 2, Junction Box
Installation).
8
Mounting
Bracket
Dashboard
CAR KIT OWNER'S MANUAL
Firewall