Publicidad
STEP #4
ENGLISH
The last step is the feeding with the coax cable.
Having taken into account inserting short pieces EAJF in step 2, the following is to remove the screw and
nut and put the cable to the terminal soldier in every party taking action.
Shield of coax is connected to the longer tube and the center of coax is connected to the short tube.
In Figure 3 appears more detailed and with the measure you must put your snug frequency from 70,0 to 70,5
Mhz.
With the same cable, we include an RF choke for best performance.
Figure 3
EAJF
15,5cm
MALLA
VIVO
Publicidad
