Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LASER PRODUCT
3140 115 3036.1
1
1
2
3
All manuals and user guides at all-guides.com
W
AZ 2050
AZ 2055
CLASS 1
4
5
6
7
8 0
9
!@#
9
8
7
^
%
$
6
DIGITAL TUNER
3 Press and hold ∞ or § until the frequency in the
display starts running.
™ The radio automatically tunes to a station of
sufficient reception. Display shows
during automatic tuning.
™ If a FM station is received in stereo,
shown.
4 Repeat steps 2-3 if necessary until you find the
desired station.
• To tune to a weak station, press ∞ or § briefly
and repeatedly until you have found optimal
reception.
To improve radio reception:
• For FM, extend, incline and turn the telescopic
aerial. Reduce its length if the signal is too strong.
• For MW (AM), the set uses a built-in aerial. Direct
this aerial by turning the whole set.
Programming radio stations
You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROG to activate programming.
3 Press PRESET DOWN/ UP once or more to select
a preset number.
4 Press PROG to confirm.
5 Repeat steps 1-4 to store other stations.
Note: You can erase a preset station by storing
another frequency in its place.
Autostore
Autostore automatically starts programming radio
stations from preset 1. Available stations are
programmed in order of waveband reception strength:
FM, followed by MW (AM). Any previous presets e.g.
manually programmed will be erased.
• Press PROG for 4 seconds or more to activate
autostore programming.
™ The display shows
followed by the radio station details when
stored. (See 5)
CMM/0252
CASSETTE RECORDER
CD Synchro Start recording
1 Select CD function.
2 Insert a CD and if desired, program track numbers.
3 Open the cassette door.
4 Insert a suitable tape into the cassette deck and
close the door.
5 Press RECORD 0 to start recording.
– Playing of the CD program starts automatically
from the beginning of the program. You don't
need to start the CD player separately.
™ To select and record a particular passage within
a CD track:
• Press ∞ or §. Release the control when you
recognize the passage you want.
• To pause CD playback, press 2;.
• Recording starts from this exact point in the
See A
track when you press RECORD 0.
6 To pause recording, press PAUSE ;.
Press PAUSE ; again to resume recording.
1
7 To stop recording, press STOP/OPEN 9/.
2
3
Recording from the Radio
4
1 Tune to the desired radio station (see Tuning to
radio stations).
5
2 Follow steps 3-7, under Synchro Start CD
recording.
Remote control
After all station
station will then
To listen to a
Press the PRES
until the desired
is
Changing tuni
In North and So
between adjace
are 10 KHz and
world this step
frequency step
area.
1 Check that th
2 To select 9KH
PRESET DO
3 Switch the s
controls.
• To select 10K
simultaneous
the set.
™ When you
shows tun
™ All preset
affected a
stations.
CD PLAYER
Playing a CD
This CD player p
CD-Recordables
1 Press y to on
™
2 Insert a CD w
close the CD
™ Display: to
™
non-finaliz
3 Press 2; to
™
, program blinks,
AUTO
files
4 To pause pla
resume play.
5 To stop CD p
MAINT
MAINTENANC
CD player and
• If the CD pla
cleaning CD
to repair.
• The lens of t
• Sudden chan
can cause co
player. Playin
attempt to cl
warm enviro
• Always close
lens.
• To clean the
center towar
cloth. Do not
damage the
• Never write
Safety Inform
• Don't expose
humidity, rain
• Clean the se
cleaning age
benzene or a
• Place the set
system does
Publicidad
Tabla de contenido
