SEVERIN RB 7026 Instrucciones De Uso página 18

1. Unpack appliance and accessories.
2. Check delivery for completeness (see illustration).
1. Appliance
2. On/Off button and "Go to station".
3. Charging station with charging cable
4. Nameplate
5. Brush roller
6. Wheel
7. Round brush (2 units)
8. Front wheel
9. Anti-fall sensors (4 units)
10. Anti-collision sensor
Not illustrated:
11. Instruction manual
12. Spare round brushes (2 units)
13. Batteries for remote control (2 units)
Notes:
∙ If the round brushes are bent during transport, follow the instructions in Chapter "Cleaning the round brushes".
∙ Before using the appliance for the first time, carefully remove the transport locks on the right and left of the housing (see
illustration). Do not use sharp objects that could damage the appliance.
1. Place the charging station with free space shown in the illustration (right/left 0.5 m; front 1.5 m) directly against a wall
within reach of a power socket.
18
Unpacking
Structure
Setting up and connecting the charging station