Publicidad
Idiomas disponibles
Idiomas disponibles
FILTER EFFECT - This button is used to activate and deactivate the filter effect. The filter effect
tweaks the original sound to add different tonal definition.
PARAMETER RATIO BUTTON - This button is used to adjust the parameter ratio value. You
can also push the RATIO knob, LED on, and turn the JOG WHEEL to adjust the parameter ratio
value.
AUTO LOOP BUTTON - Press this button to activate AUTO LOOP function. Press IN button,
and OUT point will be found automatically according to the BPM value.
More info at D- STEP BY STEP FOR IMPORTANT OPERATION 6- EFFECTS page 28.
28- MIDI A/B:
Under the MIDI mode, press this button to switch PLAYER A/B.
More info at D- STEP BY STEP FOR IMPORTANT OPERATION E- MIDI
CONTROLLER page 29.
29- SGL/CTN BUTTON:
This function allows you to choose between single track play or continuous track play (all tracks
in order). This function also operates in RELAY mode. With this button you can also switch auto
cue on and off, by pressing it for at least 1 sec.
REAR AND END SIDE CONTROLS
37
36
USB 2 PORT: This
USB MIDI PORT: Use this
is the USB port
jack to connect to a computer
where you insert
or link a host USB player.
your USB mass
storage device.
38
39
HEADPHONE JACK &
VOLUME CONTROL:This
AUDIO OUT R & L: Audio out signals.
jack is used to connect your
Connect stereo RCA cable from audio out to
h e a d p h o n e s a n d t h e
a mixer's line input channel. You can also
volumecontrol is for your
connect it to an amplifier or autoamplified
headphones is located next
loudspeakers.
to it.
All manuals and user guides at all-guides.com
A- GENERAL FUNCTIONS AND CONTROLS
35
RELAY SOCKET: Via the relay socket, two
CD players can relay play. If you connect
with a mixer which supporting fader start,
you can also relay play via mixer's
crossfader.
34
POWER BUTTON:
This button is used
to turn your unit's
power on and off.
33
P
O
W
E
R
C O N N E C T O R :
This connection is
used to connect
your main power.
30- TIME BUTTON:
The button will switch the time value described in the TIME METER between ELAPSED
playing time, TRACK Remaining time and TOTAL Remaining time.
31- </> Use this button to select FX SYNC or LOOP SET:
- FX SYNC: This is used to select the delay time of an effect to the beat of music. The beat delay
ratios are 1/4, 1/2, 3/4, 1/1, 2/1, and 4/1. To turn off auto beat sync press < button for 1sec.
- LOOP SET: When the loop set function is activated, select the beat bar of 1/2, 1, 2, 4, 8, 16(1 bar
= 4 beat) at which you would like to end your desired loop.
More info at D- STEP BY STEP FOR IMPORTANT OPERATION 3-
LOOP/AUTOLOOP page 27.
32- SHIFT BUTTON:
Hold the SHIFT button enables to call up a second function.
More info at D- STEP BY STEP FOR IMPORTANT OPERATION E- MIDI
CONTROLLER page 29.
ICONS at the VFD DISPLAY
FOLDER DISPLAY:
44
This indicates which folder you are in.
TOUCH INDICATOR: This appears when
43
anything touches the jog wheel.
CUE INDICATOR:
42
This indicator will glow when the unit is in
CUE mode and will flash every time a new
CUE POINT is set.
PAUSE INDICATOR:
41
The pause indicator will glow when the
unit is in pause mode.
PLAY INDICATOR:
40
The play indicator will glow when the unit
is in play mode.
57
AUTO CUE:
This will indicate if the Auto Cue is on or off.
Press and hold the SGL/CTN for 1 sec. to
turn the Auto Cue function on and off.
56
REMAIN/ELAPSED INDICATOR: When
RELOOP INDICATOR:
REMAIN is indicated in the VFD display the
Appears when LOOP is engaged or ready
time meter will show the current track's
to be engaged.
remaining time. When ELAPSED is
indicated in the VFD display the time meter
55
will show the current track's elapsed time.
SINGLE INDICATOR:
This indicates that the track is in single play mode,
54
the track will play once and return to CUE mode. If
TRACK DISPLAY: This indicator
the single indicator is not on, the unit is in continuous
describes which track is currently cued
mode.
or is playing.
Information at Display when loading a track:
Name of the track
Folder number of de track
Track format
Track number in Folder
MEMORY BUCKET: This indicator serves two functions.
The bucket outline details the cue memory status, a full
47
bucket outline indicates the cue memory is full.
The five bars in the memory bucket detail the digital
buffer. Each bar indicates 2 second. The search functions
will not operate until all the bars are full.
BPM METER:
This meter will display the BPM's of the current track.
46
CHARACTER DISPLAY:
This will display the name of the
45
track and album when a MP3
track is loaded.
53
51
TIME BAR INDICATOR:
This bar gives a visual approximation of a track's time.
This bar will begin to flash when a track is ending.
52
TIME METER: These indicators will detail the current Minutes,
Seconds, and Frames. The meter will display either the elapse, or
remaining time of a track. The display time will depend on the selected
time function. The selected time function will be displayed above the
TIME METER as remaining track time, or elapsed track name.
Track BPM value
Album title
USB INDICATOR:
This indicates USB port is
active.
48
TEMPO LOCK:
This will indicate
49
the Tempo Lock
function is active.
50
PITCH INDICATOR:
This meter will display the pitch
percentage applied by the pitch
slider.
USB ready
22
Publicidad
