Akiyama K2 Manual Del Usuario página 28

2- CUE (HOT CUE or CUE ON THE FLY)
A CUE point is basically a mark in a Track in the Time domain so we can return the
Playback to the set CUE point anytime. At the draw we can see 4 CUE points on a Track.
CUE1 CUE2
Playback point in time
Time axis of Track
To set a CUE point simple press IN (26) button during Playback or in mode Pause. If the
CUE point is not stored "SAVE" it will be available until we set a new CUE point. To return
Playback to last CUE point just press button CUE or CUE PLAY.
SAVED CUE/LOOPs AT BANK BUTTONS
First we must Save or Store the set CUE and Loops at the Bank buttons. If a Bank buttons
has a CUE or a Loop stored it will light blue.
- Recall CUE points during Playback:
Pressing on lighted Bank button will bring Playback to the CUE point stored at that Bank
button with out interruption of the Playback. Even if the recalled CUE point is in a Track
other than the Track in Play. The Bank button will blink.
- Recall CUE points in Pause mode:
Press a lighted Bank button, Playback will Start from the CUE point stored and will keep
ON meanwhile we keep the Bank button pressed. If we release the button Playback stops at
the CUE point stored. The Bank button will blink.
If the Bank buttons has a Loop stored, the beginning of the Loop will act as a CUE point.
The difference is that if we set a Loop, buttons IN/OUT/RELOOP will light indicating there
is a Loop stored. If you want to play the Loop again press RELOOP.
3- LOOP/AUTOLOOP
There are two ways of setting a Loop, manually and automatically.
- Manually set Loop: press button IN when you want Loop to Start and press OUT button
when you want to End the Loop. The created Loop will play continuously. IN, OUT buttons
will blink and RELOOP button will light.
To exit the Loop press OUT button again. Buttons IN/OUT/RELOOP remain lighted
showing there is a Loop ready. To return to Loop press RELOOP button. If the Loop is not
stored "SAVE" it will be available only until a new Loop is set.
27
All manuals and user guides at all-guides.com
D - STEP BY STEP FOR IMPORTANT OPERATION
Time
CUE4 CUE3
A 12 beat Loop has been set
Start End
- Automatically set Loop or "AUTOLOOP":
Press LOOP button to activate AUTOLOOP. Now, simply press IN button and a Loop is set.
The length of the Loop is set on number of Beats and selected at the / buttons depicting (1/2,
1, 2, 4,8, 16) as number of Beat of the Loop or Autoloop. See draw:
During the Playback of the Loop you will be able to modify in real time the length of it by
pressing the / buttons. Loop lenght will adapt to new set value.
NOTE: this function is only available for USB data storage.
4- RECALL STORED CUE/LOOP
RECALL MEMORY
K2 can store internally:
- 4 CUE points each Track of a USB data storage unit
Stored CUE points remain stored even if you withdraw the USB data storage unit and reload
it later.
a) Recall CUE point stored on a USB data storage unit.
a.1- use TRACK to select the Track where your stored CUE points are. VFD Display will
show "Load Cues?", press button MIDI PLAYER A (Y) to load data or press MIDI
PLAYER B (N) not to load data.
a.2- press SAVE button, button will light, use TRACK to select the Track where your stored
CUE poins.
We leave the Loop Play and The last edited Loop will
return to normal Playback. start Playbackin Reloop
mode.
LED: Red