Use In Compliance With The Regulations; Description Of Device - Cembre CP1086-W-1000-KV Manual De Uso

BEFORE USING THE INSULATED CABLE CUTTING UNITS, READ THE FOLLOW INSTRUCTIONS.
?
VITAL TECHNICAL SAFETY INFORMATION IS SHOWN BY IN THE LEFT MARGIN.

1. USE IN COMPLIANCE WITH THE REGULATIONS

These insulated cable cutting units can be used to safely cut copper and aluminium cables with
nominal voltage up to 60 kV, where the absence of voltage cannot be guaranteed.
These units can be use both indoors and out, even in wet conditions when the temperature is
between -20°C and +40°C.
Do not cut cables with special armour (e.g. cables for wells, self-bearing overhead cables, marine
cables etc.).

2. DESCRIPTION OF DEVICE

The cable cutting units comprise the following components:
– Cutting head
– Flexible insulated hose
– Insulating oil
– Pedal pump
– Earthing device
F
lexible insulated hose
P
umP
C
utting head
Fig. 1 - Cutting unit components
3