Raider RD-LM31 Manual Del Usuario página 17

Faults
Unusual noise.
Strong vibrations.
Unequal mowing.
Engine work
hard and reduce
turnovers.
The grass remains
on the ground and
the basket (6) is not
collecting it
If necessary, repair your mower is best carried out only by qualified experts in workshops on
RAIDER, which used only original spare parts. Thus ensuring their safe operation.
7.Protection of the environment.
For the environmental protection of the power tool, the electrical appliances and
packaging must undergo appropriate processing for the re-use of the valuable raw
materials contained therein. Do not dispose of power tools in household waste!
According to EU Directive 2012/19 / EC on end-of-life electrical and electronic
devices and the validation and as a national law, power tools that can no longer be
used must be separately collected and subjected to appropriate processing for the
recovery of the contents making them valuable raw materials.
Removal
Bolt of the blade is loose or connections
between fasteners.
Distorted and damaged knife.
The grass is very high.
The blade is blunt.
It is possible that the mower is fuzzy and
blocked
The blade can be installed incorrectly.
The grass is very moist.
Outlet is clogged
Grass baskets full
Basket grass is contaminated.
Reasons
Fasten the parts.
Immediately stop the mower
and replace the knife in a
specialized service.
Increase mowing height.
Replace or tipped knife. See
5.2.
Look underneath the mower
and clean it. Work always with
protective gloves.
Check. See 5.2
Wait for grass areas to dry
Disconnect the plug and clean
it.
Disconnect the plug and empty
the basket
Switch off the power plug from
the mains electricity. Cleaning
the basket. Baskets should
always to be clean to allow air
to pass freely through it.
17