Kalorik MAX X PLUS Manual Del Usuario página 10

Horno freidora electrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.
Press "Oven" to directly select oven mode. Use the selector dial to
choose between 7 oven presets or select "Bake" to choose the
time and temperature of your choice.
Once your Kalorik MAXX Plus Air Fryer oven is on and ready for use, the
selector dial allows you to scroll through the various presets available to you
to facilitate your cooking needs. The preset will blink and show the time
and temperature associated with it as you scroll through it.
To switch from Fahrenheit to Celsius: in standby mode, press the AIR FRY
and OVEN buttons simultaneously for 3 seconds to switch from one unit to
the other.
To select a preset simply press the knob. The selected preset will show on
the display while the other presets will disappear. The 1
time setting to blink, indicating that you are able to change the time
settings if you wish. Turn the selector dial clockwise to add time and
counterclockwise to remove time. Once you have the desired time set, you
can press the selector dial once more. The 2
temperature setting to blink. If you wish to change the temperature setting,
simply turn clockwise to increase temperature and counterclockwise to
decrease temperature, both possible by increments of 5°F. If you wish to
select a different preset, press a 3
selected preset will blink while the unit is heating up and will stop blinking
once the temperature is reached.
Got your time and temp set? Press Start/Stop to begin the cooking process.
The selected program will blink to indicate the unit is preheating under the
chosen programming. The preset light will blink until the chosen
temperature has been reached, and then remain steady to indicate the
unit is ready. The fan icon will turn on as well if the program you have
selected uses a fan for its cooking process.
Need to adjust? Change time or temperature settings with ease at any
point during the cooking process. All you need to do is press the selector
dial once (1) for time adjustments and twice (2) for temperature
adjustments. Press again a 3
adjust to new time and/or temperature after 3 seconds.
All done? MAXX Plus is equipped with both an automatic and manual
stopping function.
www.KALORIK.com
time to go back to preset selection. The
rd
time to confirm, or unit will automatically
rd
10
press will cause
st
press will cause the
nd
AFO 47271 SS – 201012

Publicidad

Tabla de contenido
loading

Tabla de contenido