Powerbuilt 647876 Guia De Inicio Rapido página 3

OPERATING INSTRUCTIONS
Pulley Holder Tool Setup
1. Locate Pulley Dowel Holes and Determine
which Diameter Adapter Best Suits the
Application (Fig. 1).
2. Install Adapters into Spanner Wrench
Threaded Ends with Pivoting Nut Facing
Outward Away from Pulley (Fig. 2).
3. Measure the Distance Between the Pulley
Holes, Open the Jaws to Desired Distance
and with 14mm. Wrench or Socket Tighten
the Nut on the Spanner Wrench to Secure
Tool Width (Fig. 3).
Fig. 1
2
Fig. 2 Fig. 3