Safety Information - EINHELL RTB-003 Manual Del Usuario

When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Retain this manual in a safe place, so
that the information is available at all times. If you
give the equipment to any other person, hand
over these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these in-
structions and the safety information.

1. Safety information

Important! The following basic safety action
measures to be taken when using electric tools to
protect the user from electric shocks and the risk
of injury and fire.
Read all the following information before you use
this electric tool and keep these safety
instructions in a safe place.
1. For your own safety, read and observe this
safety information for the router table and the
information supplied by the manufacturer of
the router.
2. The router table must always be securely
fastened to a workbench in a horizontal
position.
3. Keep your workplace clean and well illumina-
ted.
4. Avoid abnormal working postures. Make sure
you stand squarely and keep your balance at
all times.
5. Never use the machine in the vicinity of
combustible materials, liquids or gases.
6. Wear safety goggles, a visor, a breathing
mask, an apron and long tight sleeves.
7. Keep children away. Do not allow other per-
sons, particularly children, to touch the tool.
Keep them out of your work area.
8. Always leave the safety devices in position
and make sure that they are in good working
order.
9. Check at regular intervals that all screws and
nuts are fastened securely enough, as they
may work loose as the result of vibrations.
10. Make sure that the power cable is a safe
distance from the working area.
11. Do not use the router table with highperfor-
mance electric tools that are not suitable
for the accessory device.
12. Do not try to machine workpieces which are
obviously too big for the router table.
Anl_SA_Anl_RTB_003_SPK8.indb 23 Anl_SA_Anl_RTB_003_SPK8.indb 23
GB
13. Never leave an electric tool unattended when
it is running. Always switch off your electric
tool before leaving it.
14. Always pull out the power plug when not in
use, before carrying out any maintenance
work and before changing the tool.
15. Before using, make sure that the router is
securely fastened in its holder in accordance
with the instructions.
16. Do not overload your tool; allow the router to
work without applying any pressure.
17. Check to see if all parts are mounted. In this
connection, please read the instructions and
particularly the safety information. Never use
the machine if it is not fully assembled.
18. Use the accessory parts and electric tools for
their intended purpose only.
19. Check the accessory parts to make sure that
they are not damaged. Also make sure that
moving parts, clamping devices and safety
guards are working correctly.
20. Be alert at all times. Concentrate on what you
are doing. Use common sense when working.
Never use the electric tool when you are
distracted.
21. Keep your electric tools in a safe place. When
equipment is not being used it should be kept
in a dry, closed place out of children's reach.
22. Wear suitable work clothes. Do not wear
loose clothing or jewelry as they may get
caught in moving parts. Non-slip shoes are
recommended.
Wear a hair net if you have long hair.
23. Always remove keys and wrenches after use.
Before switching on, make sure that all keys
and wrenches have been removed from the
tool.
24. Before you put the router into operation,
check that the routing cutter is properly
seated.
25. The router table may be used only for routing
work on flat wood and flat wood-based
materials.
26. Provide an additional support for longer
workpieces.
27. Keep your hands away from the routing cutter.
Use a push stick if necessary.
28. Use the router table only when a dust extrac-
tion device is connected.
29. Always guide the workpiece against the run-
ning direction of the routing device.
30. Never reach under the router table when the
machine is running.
- 23 -
22.06.2021 09:52:34 22.06.2021 09:52:34