Layout And Items Supplie (Fig 1-3); Proper Use; Technical Data - EINHELL RTB-003 Manual Del Usuario

31. Never cut over metal parts, screws, nails etc.
32. To avoid damage to the router, make sure
there are no foreign objects attached to the
workpiece.
2. Layout and items supplie
(Fig 1-3)
1. Longitudinal stop
2. Table width extension
3. Feet
4. Table top
5. Workpiece guides
6a ON/OFF switch
6b Socket
7. Angle stop
8. Transparent router cover
9. Connection for dust extractor
10. Table insert
11. Installation material for feet and table width
extension
12. Installation material for router
13. Installation material for workpiece guides
14. Installation material for longitudinal stop
15. Clip for routers without continuous operation
mode
Important! There is no router supplied with the
router table!

3. Proper use

The router table is designed for stationary jobs
with a suitable router. Please observe the fol-
lowing information and the information supplied
by the manufacturer of the router.
Anl_SA_Anl_RTB_003_SPK8.indb 24 Anl_SA_Anl_RTB_003_SPK8.indb 24
GB

4. Technical data

See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
Wear ear-muffs.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specified value
in exceptional circumstances.
The specified vibration value can be used to
compare the equipment with other electric power
tools.
The specified vibration value can be used for initi-
al assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect con-
ditions.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 24 -
22.06.2021 09:52:34 22.06.2021 09:52:34