Uline H-7645 Manual De Instrucciones

H-7645
30" WIDE AREA VACUUM
DAILY
1. Check Dust Bag – Before each use, check the
disposable paper HEPA filter and empty if three-
quarters full or more.
2. Belt Condition – Check the belt for signs of wear.
Change the belt when it is loose or has cuts or
cracks. Refer to the diagram on the underside of the
base for proper installation of belt and brushroll.
3. Supply Cord and Plug – Check supply cord and
plug for any cuts or damage. If damaged, have the
supply cord and plug assembly replaced by the
Uline service team.
4. Motor – If there are unusual sounds or if poor
performance occurs, the motor should be inspected
immediately by the Uline service team.
WEEKLY
1. Cloth Dust Bag – Inspect the cloth bag assembly for
any unusual wear or tears. Replace worn bag with
genuine Tornado bags.
PAGE 1 OF 3
1-800-295-5510
uline.com
ROUTINE MAINTENANCE
2. Brush Roll Condition – Check for and remove
any loose material such as string or hair wrapped
around the brushroll.
3. Filter – Check all filters for clogs and replace as
needed.
MONTHLY
1. Cleaning – Inspect and clean the vacuum,
including the fan chamber and under the hood.
2. Electrical – Inspect the cord assembly for wear and
check for proper handle assembly.
3. Handle – Check the handle assembly for tightness,
and replace handle bolts if missing.
4. Motor – Inspect the motor every six months for any
damage. Inspect the motor immediately if there are
any unusual sounds or if poor performance occurs.
5. Filter – Check all filters for clogs and replace as
needed.
Para Español, vea página 2.
Pour le français, consulter la page 3.
0621 RH-7645