IMPORTANT INSTRUCTIONS
PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING THIS APPLIANCE.
IMPORTANT:
Read all instructions and warnings carefully before starting installation.
Failure to follow these instructions may result in a possible electric shock, fire hazard and /or injury and will void
the warranty.
Installation of Electric Log Set, should take 15 minutes. The only tool required is a phillips head screwdriver, not
supplied with this unit.
Note:Do not use outdoors.
INSTALLATION INSTRUCTIONS
Tools Required for Assembly
1. Line up the legs with the hole
positions of the grate. Make sure
to line up the edges correctly.
3. If the product is being used on a
un-level surface, adhere the
provided leveling pads onto the
feet in order to compensate
accordingly.
A407
Phillips Head Screwdriver
Glue side
2. Fasten the bolts using a philips
Head screwdriver. Make sure not
to over-tighten in order to
prevent damage to the product.
4. Plug the power supply
transformer to a standard 120V
wall outlet as shown, and into
the DC port of the product.
3
www.tsicustomerservice.com