Monogram ZXSTEAM1 Manual De Instalación

Installation
Instructions
Kit Includes:
Screws: 2
White Caps: 2
Steam Oven Trim Install Instructions
1. Take both screws and insert them into
the white caps provided.
2. Insert both screws with cap, into the
screw hole on each end of the flat
stainless-steel piece and screw this
into your cabinet.
Bottom of Steam Oven
3. Make sure the flat stainless steel piece contacts the
bottom of the steam oven before securing to the
cabinet.
If installing side by side with another appliance,
make sure trim bottoms align prior to driving the
screws into the cabinet.
Flat Stainless-Steel
Piece: 1
Stainless-Steel
Trim Piece: 1
Screw with Cap
Flat Stainless-
Steel Piece
Statement
Steam Oven
Trim Kit
Steam Oven Trim Install Instructions
(Cont.)
4. Once the flat
piece is screwed
into the cabinet,
look for the open
hole in the trim
piece.
5. Line up the white
cap and the hole
in the trim piece.
6. Place and rest
the trim piece on
to the white cap.
7. Make sure the trim piece is against the flat
stainless-steel piece and they are touching.
8. Pull down on the trim piece so the smaller portion of
the keyhole on the trim piece, fits around the white
cap. The trim piece will lock into place.
9. The trim piece is secured to the cabinet.
Trim
31-2000929 Rev. 1 07-21 GEA