Operation; Control Panel Operation; Menu Map; Auto And Sound Modes Defined - Chauvet DJ Beamer 6 FX Manual Del Usuario

4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the life
of your laser. Always disconnect the Beamer 6 FX from power when not in use.
Control Panel
To access the control panel functions, use the four buttons located underneath the display.
When the product is on, the LED monitor on the rear panel will show the current operating mode

Operation

(Standalone or DMX). The product will retain the last saved settings when powered off.

Menu Map

Mode
DMX
Static Color
Auto
Speed
Sound
IR Function

Auto and Sound Modes Defined

Program Effect
1 All- Beams, Strobes and Laser
2 Beams Only
3
Beams Only
4 Laser Only
5 Laser Only
6
Strobes Only
7 Strobes Only
8 Beam and Laser
9
Beam and Strobe
10 Laser and Strobe
Beamer 6 FX User Manual Rev. 3
All manuals and user guides at all-guides.com
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Programming Steps
2-CH
15CH
C--
P--
S--
SND
SET
Description
–d511
d001
Sets DMX personality and address
–d498
d001
C 1 Red
C 2
Green
C 3 Blue
C 4 White
P 1-10
Selects Auto Program Effect
–S.99
Speed for Sound Mode and Auto Programs
S.01
SN 1-10 Selects Sound Active Mode Program Effects
ON
On/Off IR functions
OFF
Page 19 of 112