Silvercrest SDI 3500 D4 Manual Del Usuario página 57

NOTE
►
5) Press the
6) To switch off the induction field 1/3, press the "On/Off" button
7) Pull the mains plug out of the mains socket if you no longer wish to use the
Timer
You can preselect a cooking time from 1–180 minutes, after which the respective
induction field 1/3 will switch off.
1) Start cooking (in power or temperature mode) as explained above.
2) Press the Timer button
3) Set the desired time by pressing the
NOTE
►
■ 54 │ GB │ MT
If there is no suitable pan on the induction field 1/3, you will hear a
beep after a few seconds which will repeat for approx. 1 minute. The
display t shows the error "
induction field 1/3 to continue cooking (see section Safety cut-off).
r or z button repeatedly until the required power level or
temperature is shown on the display t.
All control lamps switch off. The appliance is now in standby mode.
appliance.
" " appears on the display t. The Timer control lamp
The time shown on the display t increases or decreases in steps of 1 minute.
The timer will start if no entries are made within 5 seconds.
r or
Hold down the
The display t now alternates between the set power/temperature level and
the remaining time until switch-off.
When the timer is up, the respective induction field 1/3 switches off
automatically and the appliance switches back into standby mode.
". Place a suitable pan with contents on the
o.
r or
z button to scroll through the values more quickly.
q.
p lights up.
z buttons.
SDI 3500 D4