Ec Declaration Of Conformity - Explore Scientific RDP3007 Manual De Instrucciones

1. Press [ ] button to activate the backlight
for 8 seconds and projection for 5 minutes.
2. Press the [
projection display 180°.
3. Press and hold [
continues projection on in case of using adapter
power source and toggle projection on for 5 minutes
in case of using batteries power only. Press and hold
[ ] button again, turn off projection and
toggle continues projection off.
4. Press and hold [ ] to display Temperature or Time
(only when the projection is on).
RESET
Press RESET to return to the default settings.
SPECIFICATIONS
Dimensions (Main unit):
98 x 43 x 97 mm (L x W x H)
Weight (Main unit):
189 g
] button again, to flip the
] button, toggle
Temperature display range:
-5°C to +50°C (23°F to 122°F)
Power:
2x AAA (LR03) 1.5V batteries
Power adapter 3.6V (100mA)
NOTE
• When the temperature is lower than -5°C (23°F), the
temperature displays LL.L. When the temperature is
higher than 50°C (122°F), the temperature displays
HH.H.

EC DECLARATION OF CONFORMITY

Hereby, Folux GmbH declares that the
equipment type with part number: RDP3007
is in compliance with Directive: 2014/53/
EU. The full text of the EU declaration of conformity is
available at the following internet address: www.
bresser.de/download/RDP3007/CE/RDP3007_CE.pdf
NOTES ON CLEANING
• Remove the batteries before cleaning.
EN
IT
DE
FR
ES
11