Publicidad
Idiomas disponibles
Idiomas disponibles
Link Status
The Link Status tab displays the adapter's current status.
The following table describes the items found on the Network Status screen.
Status: Shows whether the station is connected to the wireless network, if not
connected, display RF is closed; if connected, display AP name and BSSID.
Extra Info: Shows link status and the current channel in use.
Link Speed: Shows the current max Transfer rate, unit is Mbit/sec.
Throughput: Displays Tx and Rx rate, unit is Kbits/sec.
Link Quality: Shows the quality of the signal. dBm: If you want to know the signal
strength in the unit of dBm, select this check box
Signal Strength: Shows the strength of the signal.
Noise Level: Displays the noise level in the wireless environment.
7
Publicidad
