TFA 60.2528 Instrucciones De Uso página 15

Ocultar thumbs Ver también para 60.2528:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
TFA_No. 60.2528_Anl_11_21
BINGO - Radio-controlled alarm clock
8. Alarm
• The alarm clock has two alarms with different alarm tones.
8.1 Setting of the first alarm time
• Press the SET 1 button in normal mode.
• 7:00 (default) or the last adjusted alarm time appears on the display.
• The hour digits flash.
• Press the – or + button to adjust the hours.
• Confirm the setting with the SET 1 button.
• The minute digit will be flashing. Press the – or + button to adjust the min-
utes.
• Confirm the setting with the button SET 1.
• The adjusted alarm time appears on the display.
• To activate the alarm function, move the switch AL 1 ON/OFF upwards
(ON). At the same time, the point is highlighted in color and around the
alarm time a frame appears with the alarm symbol:
• The first alarm time is activated.
• When the adjusted alarm time is reached, the alarm will ring.
• The alarm symbol will be flashing and the backlight will be activated for
5 seconds.
28
22.11.2021
15:09 Uhr
Seite 15
BINGO - Radio-controlled alarm clock
• Press any button and the alarm will stop.
• If the alarm is not stopped manually, the increasing alarm will automati-
cally turn off after certain minutes.
• The alarm symbol rests on the display and the alarm time will be reactivat-
ed at the same time.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze
function will be activated.
• Once the snooze function is activated, zZ will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Slide the AL 1 ON/OFF switch downwards (OFF) to deactivate the alarm
function.
• The alarm symbol and the color mark disappear from the display.
8.2 Setting of the second alarm time
• Press the SET 2 button in normal mode.
• 7:00 (default) or the last adjusted alarm time appear on the display.
• Set the alarm time for the second alarm in the same way.
• To activate/deactivate the second alarm function, move the switch AL 2
ON/OFF up (ON)/down (OFF).
9. Backlight
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 5 seconds.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido