®
Products with Polarized Plugs
Figure 1
Polarized Plug
Products with Grounded Plugs
GROUNDING PIN
(sketch A)
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
Figure 2
Grounding methods
When using an electrical furnishing, basic precautions should always be followed, including the following:
PLEASE SAVE THESE INSTRUCTIONS, AND THE USER GUIDE, IN AN OBVIOUS PLACE FOR THE END USER AFTER ASSEMBLY.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Always unplug this furnishing from the electrical outlet before cleaning.
2. Use this cart only for its intended use as described in these instructions. Do not us e attachments not recommended by the manufacturer.
3. Never operate this cart if it has a damaged cord or plug, if it is not working properly, or if i t has been dropped or damaged.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
9. Do not sit/stand on product.
10. Inspect regularly, stop using if damaged or loose parts found.
WARNING - Risk of electrical shock.
POLARIZED PLUG INSTRUCTIONS (Only for Products with Polarized Plug) -
furnishings have a polarized plug (one blade is wider than the other) like the plug illustrated in Figure 1. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
INSTRUCTIONS FOR DOUBLE INSULATED PRODUCTS:
is a means for grounding to be added to the product. The plug looks like the plug illustrated in Figure 1. A double insulated
product is marked with the words "double insulation", "double insulated" or
GROUNDING INSTRUCTIONS (For Grounded Products only) -
properly grounded outlet in accordance with all local codes and ordinances.
For products sold in North America and other 120V regions: the product is for use on a nominal 120-V circuit. These products use a
grounding plug that looks like the plug illustrated in sketch A in Figure 2. Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with this product.
WARNING - Risk of fire and shock. Use only type SJT 18 AWG cord.
PLUG ILLUSTRATION DISCLAIMER - Illustrations shown here may not match your product. Depending on your region, the plug pin size
and shape may change.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this furnishing.
No grounding means is provided on a double-insulated product. Nor
.
Some products must be grounded. Connect these types of appliances to a
To reduce the risk of electrical shock, some
Page 4 of 14
P/N 1458647001
Doc # 159173 Rev B