Homewerks 7130-13-BT Manual Del Usuario página 7

INSTALLATION INSTRUCTIONS (continued)
5. Insert suspension bracket (C) into the tabs on each side of the
fan housing (A) and then mount the fan housing (A) to the joist
by inserting the wood screws (AA) into the holes indicated on the
metal tabs of the fan housing (A). Tighten the wood screws (AA)
until the fan housing (A) is firmly secured to the joist.
6. Attach the end of each of the suspension brackets (C) to the
ceiling joist using wood screws (AA). Skip to step 10.
7. For spacing of 21-1/4 in. to 23-1/2 in. between ceiling joists:
Insert suspension brackets (C) into the tabs on the fan housing
(A) and then slide suspension brackets (D) into suspension
brackets (C).Repeat on the opposite side of the fan housing (A).
8. Position the fan housing (A) so the bottom edge of the fan
housing (A) is flush with the ceiling board. Do not the flush
mount the fan housing (A) to the joist.
Attach the end of each of the suspension brackets (C, D) to the
ceiling joists using wood screws (AA).
9. Secure the suspension brackets (C, D) to the fan housing (A)
using machine screws (BB).
Homewerks.com
5
6
AA
7
D
8
AA
9
C BB
7
A
AA
A
C
A
C
A
C,D
A
D
D
D
BB