Timer Function - DeLonghi TRD40615E-6A Manual Del Usuario

Key lock
In order to avoid accidental operation, you can lock the
keyboard using the keylock function. To activate this function
press buttons + and - together for at least 3 seconds. The
display shows the symbol
will be emitted. To disactivate the function proceed in the
same way.

Timer function

This function can be activated in two different ways.
Delayed start: With the appliance off, press the timer
button (F) . The symbol is displayed flashing together
with the hours left before the appliance comes on (see fig.
3). Change the hours using the + and - buttons, then wait
a few seconds for the program to be stored. The display will
return to off and the
programmed time has elapsed, the appliance will come on
with the previous settings.
Fig. 3
Delayed stop: with the appliance on, press the timer button
. The symbol is displayed flashing together with the
hours left before the appliance goes off (see fig. 3). Change
the hours using the + and - buttons, then wait a few seconds
for the program to be stored. The current settings and
symbol are displayed. At the end of the set time the appliance
switches off automatically. To go back to operating without
the timer, press the timer button twice.
The timer symbol disappears from the display.
Note: the time is settable from 0.5 to 24 hours.
Change of the temperature scale
The display can show the temperature in both °F and °C.
To select the desired temperature scale, when the unit is in off
position, press and hold the "+" and "ECO" keys for at least 10
seconds, then release.
The change of scale will be indicated by two short beeps.
Alarms
The appliance has a diagnostic system that makes it possible
to signal malfunctions.
In case of problems, the display will show an alarm message:
(Probe failure)
With this alarm the appliance does not
operate. Contact the De longhi toll free
and a double acoustic signal
symbols remains on. When the
number.
(High temperature)
When the product's internal temperature
is too high, the heating power will
progressively
be reduced. The display shows
intermittently till the internal temperature
is lowered. To remove the cause of this
alarm check that the unit is not covered or
obstructed.
SAFETY DEVICE
A safety device switches the appliance off in the event of
overheating. To restart the appliance, contact the De longhi
toll free number.
MAINTENANCE AND SERVICE
Always remove the plug from the power outlet and allow the
appliance to cool. Wipe appliance with a soft damp cloth, do
not use detergents and abrasives.
Should the appliance not be in use over a certain length of
time, wrap the cord around the cord holder and store it in a
dry place. This appliance has been built to give many years of
trouble free service. In case of malfunction or doubt, do not
try to repair the appliance by yourself: this may result in a
fire hazard or electric shock. Contact the De longhi toll free
number.
7
and automatically