Select Load Size - Kenmore 2002 Serie Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7.

Select LOAD SIZE

Select the load size setting most suitable for your load. Extra
Small will add a low amount of water for smaller loads and
Extra Large will add the most amount of water for large or bulky
loads. Items need to move freely.
8.
Select WASH TEMP
After selecting the load size, select the Wash Temp by turning
knob to desired temperature. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cool
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Cold
This is the temperature from your
faucet. If your tap cold water is
very cold, warm water may be
added to assist in soil removal and
help dissolve detergent.
All manuals and user guides at all-guides.com
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select options (on some models)
Select the desired cycle options. If you are using Fabric Softener,
be sure to select one of the Rinse with Fabric Softener options.
10.
Press START/PAUSE/Unlock Lid
to begin wash cycle
Press the START/PAUSE/Unlock Lid button to start the wash cycle.
Whenthecyclehasfinished,theCYCLECOMPLETEstatuslight
will light. Promptly remove garments after cycle has completed to
avoid odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
PAUSE/Unlock Lid again to restart the cycle.
If lid is left open for more than 10 minutes, the water will
pump out automatically.
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

2110 serie2111 serie2118 serie2120 serie2129 serie

Tabla de contenido