Note
When playing a Super Audio CD with a multi-channel
area (page 11), the ANALOG 2CH OUT jacks output
multi-channel FRONT L/R signals only. In this case,
the vocals or other sounds may not be heard, depending
on the disc.
Connecting a multi-channel
amplifier
When you have an amplifier equipped with the
5.1CH input jacks (multi-channel amplifier, AV
amplifier, etc.) and connect the player and the
amplifier through the ANALOG 5.1CH OUT
jacks (FRONT L/R, SURROUND L/R,
CENTER, SUB WOOFER), you can play a
Multi-channel Super Audio CD and enjoy the
multi-channel playback.
Use audio connecting cords for this connection.
For FRONT or SURROUND connection, use
the connecting cords (Red and White jacks) and
be sure to match the color-coded pin to the
appropriate jacks: white (left) to white and red
(right) to red. For CENTER and SUB WOOFER
connection, use the connecting cords (Black).
FRONT or SURROUND
connection
Audio connecting cords (supplied*)
White (L)
Red (R)
* If you use the supplied audio connecting cord for
ANALOG 2CH connection, you will need another
audio connecting cord (not supplied) for ANALOG
5.1CH connection.
CENTER or SUB WOOFER
connection
Audio connecting cords (supplied)
Black
ANALOG
2CH OUT
5.1CH OUT
FRONT
SURROND
CENTER
L
L
R
R
SUB
WOOFER
A
B
A: To front speaker input jacks (L/R)
B: To surround or rear speaker input jacks (L/R)
C: To sub woofer input jack
D: To center speaker input jack
Notes
• There are 5CH, 4CH, and 3CH Super Audio CDs.
When you play these discs, the signal does not output
from all the jacks of the ANALOG 5.1CH OUT. For
details of the playback, see the cover or instructions
of the Super Audio CD.
• For multi-channel playback (through the ANALOG
5.1 CH OUT jacks) of a Super Audio CD with both
2 channel/multi-channel areas, set the default
playback area to "SEL-Mch" (multi-channel
playback area, see page 11). Otherwise, only 2
channel playback will occur.
DIGITAL(CD)
OUT
COAXIAL
OPTICAL
To multi-channel
amplifier, AV
amplifier, etc.
C D
continued
GB
7