Step 2: Setting Up The Speakers - Sony HST-471 Manual De Instrucciones

Step 1: Hooking up the system
(continued)
To operate the CD players
CDP-C661/CDP-CX571
To
Select disc numbers
Select disc numbers directly
(for CDP-CX571 only)
Select track numbers
Select track numbers over 10
(for CDP-C661 only)
Select track numbers directly
(for CDP-CX571 only)
Select a track
Pause play
Stop play
Start play
1
* You cannot use the DISC SKIP – button for
CDP-C661.
2
* Example:
To select 24th disc: DISC n 2 n 4 n ENTER
* 3 Example:
To select 24th track in the disc: >10 n 2 n 4
4
* Example:
To select 24th track in the disc: TRACK n 2 n
4 n ENTER
EN
8
Press
1
DISC SKIP +/–*
DISC, disc
number, then
ENTER* 2
1 to 10
>10* 3
TRACK, track
number, then
ENTER* 4
+ or =
P
p
·
Step 2: Setting up
the speakers
By connecting the speakers, you can enjoy
Dolby Pro Logic Surround sound. Dolby Pro
Logic Surround is a decoding system
standardized in TV programs and movies.
Dolby Pro Logic Surround improves sound
imaging by using four separate channels.
These channels manipulate the sound and
enhance the action as it happens on the
screen.
Selecting the Dolby Pro
Logic Surround mode
To take advantage of Dolby Pro Logic
Surround, you should connect at least one
pair of rear speakers and/or one center
speaker, plus a TV and a VCR. Also, to enjoy
a full effect, you need to select the
appropriate Dolby Pro Logic mode
(NORMAL, WIDE, 3CH or PHANTOM
modes) according to your speaker system.
NORMAL mode
Select NORMAL mode if you have front and
rear speakers and a small center speaker such
as those provided with this system. Since a
small speaker cannot produce enough bass,
the bass sound of the center channel is output
from the front speakers.
Center speaker
Front
speaker
(L)
Rear
speaker
(L)
Front
speaker
(R)
Rear
speaker
(R)