Oase CFS Instrucciones De Uso página 28

- GB -
Repeat the whole procedure if you need to programme the new programme, or press
the main menu.
The next step in the main menu is programming the clock. This can be done by pressing the
make changes, using the
key. You can set the day, hour and minutes in sequence. Obviously, the set time and day are those that
the programming will refer to.
Display during Operation
Operating mode
•
Weekly timer
Alarms and statuses
•
Lev = Level alarm
•
Flw = Flow alarm
•
Mem = Memory alarm
Pos: 76 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @
28
All manuals and user guides at all-guides.com
to set the required values and then confirming by pressing the
FLOW
sensor •
Day of the week
status
Displays the quantity during
dosages
Weekly F Mon
F
F
Lev Stop 12.01
Time
•
Pump status
•
Empty = pump in start
•
Stop = pump stationary
•
Paus = pump in pause
Display during Setting (MODE key)
Operating mode
•
Displays in sequence:
programme number, activation
time, quantity, dosage time,
relay status.
P01:START
14.40
Displays hours
and minutes
Time
• Displays hours and minutes
to return to
•
Day of the
week
Mon
12.01
to