Husqvarna LC 142i Manual De Usuario página 9

Ocultar thumbs Ver también para LC 142i:
Tabla de contenido

Publicidad

Product use and care
Do not force the product. Use the correct product for
your application. The correct product will do the job
better and safer at the rate for which it was
designed.
Do not use the product if the switch does not turn it
on and off. Any product that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the
product before making any adjustments, changing
accessories, or storing products. Such preventive
safety measures reduce the risk of starting the
product accidentally.
Store idle products out of the reach of children and
do not allow persons unfamiliar with the product or
these instructions to operate the product. Products
are dangerous in the hands of untrained users.
Maintain products and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
product's operation. If damaged, have the product
repaired before use. Many accidents are caused by
poorly maintained products.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the product, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the product for operations
different from those intended could result in a
hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the product in unexpected situations.
Service
Have your product serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is
maintained.
Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Battery tool use and care
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use products only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
1692 - 002 - 26.11.2021
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritations or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130 °C / 265 °F may cause
explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
Lawnmower safety warnings
Do not use the lawnmower in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
Thoroughly inspect the area for wildlife where the
lawnmower is to be used. Wildlife may be injured by
the lawnmower during operation.
Thoroughly inspect the area where the lawnmower is
to be used and remove all stones, sticks, wires,
bones, and other foreign objects. Thrown objects
can cause personal injury.
Before using the lawnmower, always visually inspect
to see that the blade and the blade assembly are not
worn or damaged. Worn or damaged parts increase
the risk of injury.
Before use, check the supply cord and any extension
cord for signs of damage or aging. Do not use the
lawnmower if the cord is damaged or worn. If the
cord is damaged or worn during use, switch off the
lawnmower and do not touch the cord before
disconnecting it from the supply. A damaged supply
cord or extension cord may result in electric shock,
fire and/or serious injury.
Check the grass catcher frequently for wear or
deterioration. A worn or damaged grass catcher may
increase the risk of personal injury.
Keep guards in place. Guards must be in working
order and be properly mounted. A guard that is
loose, damaged, or is not functioning correctly may
result in personal injury.
Keep all cooling air inlets clear of debris. Blocked air
inlets and debris may result in overheating or risk of
fire.
While operating the lawnmower, always wear non-
slip and protective footwear. Do not operate the
lawnmower when barefoot or wearing open sandals.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lc 142is

Tabla de contenido