KTM Power Parts 79011955044 Instrucciones De Montaje página 10

10
All manuals and user guides at all-guides.com
- Insert the large battery (not included) into the battery compartment
with the terminals facing forward and secure it using the holding
bracket
- Mount original screw
- Position positive cable
- Position negative cable
NOTE
The contact disks must be mounted under the cable lugs, with the
claws facing toward the battery terminal.
- Slide positive terminal cover
- Position the side fairing and engage in area
- Mount screw
- Mount screw
- Tighten screw
- Position the spoilers on both sides.
- Mount screws
- Mount and tighten screws
- Tighten screws
Final steps:
- Install air fi lter box cover (see the Owner's Manual).
- Mount the seat (see user manual).
.
and tighten to 10 Nm.
and tighten the screw to 2.5 Nm .
and tighten the screw to 2.5 Nm .
over the positive terminal.
but do not tighten yet.
and tighten to 35 Nm (Loctite 2701™).
to 10 Nm.
with collar bushings, but do not tighten them yet.
on both sides.
to 10 Nm.
.