Setting The Language - Kobian MoviePix M-330 Manual Del Usuario

Setting the language

When you power on the camera for the first time, the
LCD display may not be shown in your local language.
You can set the LCD display language using the
method below:
1.
Set the Mode Dial to the Settings mode, and the
Settings menu will display as illustrated.
2.
Use the Up or Down (
Language item.
3.
When the Language item is highlighted, press
the Menu/OK (
menu. In the sub-menu, use the Up or Down (
button to select a suitable language, and then
press the Menu/OK (
4.
After all settings are done, you are ready to use
the camera. Set the Mode Dial to other modes
according to your purpose.
All manuals and user guides at all-guides.com
) button to highlight the
) button to enter the sub-
) button to adopt.
13
Settings
Time ----/--/--
Beep
Flicker
TV System
Settings
Language
) Auto Off
Format
Default