Using Flash Strobe; Zooming; Selecting Metering Mode - Kobian MoviePix M-330 Manual Del Usuario

Taking a still picture (continued)
Using the flash strobe
Before taking a still picture, you can set to use the flash strobe if the lighting is not
sufficient for your shooting environment.
Pressing the Left ( ) button repeatedly will
switch the flash mode in the following order:
g g
Off Auto Off.
Off ( ): The flash is disabled.
Auto ( ): The flash automatically fires
when the lighting is insufficient.
1. If the battery life icon indicates
insufficient voltage. Please change batteries immediately.
2. You cannot take pictures when the flash strobe is recharging.

Zooming

Before taking a still picture, you can
press the Up or Down (
zoom in or zoom out the picture.
Selecting metering modes
Before taking a still, you can press the Right ( )
button to select a metering mode. The metering
mode changes in the following order:
Auto g Average g Center g Center-low g Auto.
For a detailed description of each metering mode,
please see page 16.
All manuals and user guides at all-guides.com
, the flash strobe may be disabled due to
) button to
18