ultega DRAFTER 550 PRO Manual De Uso página 8

ASSEMBLY STEP
Schritt 4
• Put the seat (28) on Aluminum Sliding Tube (8), insert the M6x1.0x12 Screw (9) through the end of
Aluminum Sliding Tube (8) with Seat Block (10), secure with M6x10 Screw (11).
1
2
Schritt 5
• Attach the cover (2) to the rear stabilizer (3)
secure with M5x10 Screw (25)
Schritt 6
• Remove the Pull Pin (37), loosen Knob (87) and
Flat Washer (88).
• Fold the Aluminum Sliding Tube (8), then ixed
Aluminum Sliding Tube (8) with Pull Pin (37)
• Attach Bottom Cover (18) to underside of
Aluminum Sliding Tube (8), lock with M5x8
screw (12)
All manuals and user guides at all-guides.com
US
8
www.ultega.net