ultega DRAFTER 550 PRO Manual De Uso página 9

ASSEMBLY STEP
Step 7
• Insert the Pedal Fixing Axle (35) through Main
Frame (39), secure Pedal Fixing Tube (34) with
OD22xID8.5x1.5T Flat Washer (16), M8 Spring Washer
(15) and M8 Nut (31)
Step 8
• Insert the Pedal Axle (58) through the Main Frame (39), slide Pedal Tube (32),
D22xID13x2.0T Flat Washer (33) and Pedal (30 ,57), then lock it up with the
OD22xID8.5x1.5T Flat Washer (16), M8 Spring Washer (15) and M8 Nut (31).
Step 9
• Remove Lock Pin (51) preassembled in the Front Stand (52), attach the Front Stand (52) to Front
Stabilizer (50) then lock it down with Pin (51).
Recheck
all bolts, nuts and pedals are
tightened securely
before use the machine
All manuals and user guides at all-guides.com
US
9
www.ultega.net