Uline H-7206 Guia De Inicio Rapido página 2

Figure 2
Core holders
Figure 3
Figure 4
Liner
Hub Lock
Figure 5
Take-Up Hub
Lock Rod
PAGE 2 OF 9
INSTRUCTIONS CONTINUED
Reel Hanger
Bar
Guide Rods
How to Use
Small Hub Lock:
Slide onto rod.
Gently turn
clockwise until it
locks into place.
2. Insert core holders into each side of label roll.
3. Slide loaded roll into reel hanger bar. (See Figure 2)
NOTE: Labels should dispense from under the
roll.
4. Feed label liner under guide rods. (See Figure 3)
5. Feed label liner between brush and strip plate.
(See Figure 4)
6. Adjust hub lock for guiding material.
7. Slide lock rod off take-up hub. (See Figure 5)
8. Secure label liner onto take-up hub.
0821 IH-7206