Operating Instructions; Product Description; Control Panel; Other Features - Kunft KDH4756 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. OPERATING INSTRUCTIONS

2.1. Product Description

Front
Fig. 1

Control panel

Air intake grille
Water collector
Air filter (behind the air
intake grille)
Handle
NOTE: All the figures in the manual are for illustration purposes
only. Your unit may be slightly different. The actual shape shall
prevail, but the operations and functions are the same.
Control Panel
The control panel of the dehumidifier you purchased may look like
one of the followings:
Control panel (1)
Control panel (2)
Rear
Fig. 2
Air Outlet grille
Power cord band (Used only
when storing the unit.)
Drain hose outlet
Power Cord
Power Plug
Fig. 3
22
dehumidifier
Indicator lights
Collector full indicator light;
Auto defrost indicator light;
• When auto defrost is operation on, the indicator light illuminates.
• The indicator light flashes at 5 Hz under room temperature
sensor error or evaporator temperature sensor error.
NOTE: if the auto defrost indicator light flashes, unplug the unit
and plug it back in. If error persists, call for service
Continuous operation on indicator light
40 % humidity level set mode operation on indicator light
50 % humidity level set mode operation on indicator light
60 % humidity level set mode operation on indicator light
Control buttons
Mode
Press to select the operation mode: continuously dehumidification →
40 % humidity level → 50 % humidity level → 60 % humidity level →
continuously dehumidification
POWER
Press to turn the dehumidifier on and off.

Other features

Collector Full Light
It lights up when the collector is ready to be emptied or when the
collector is removed or not replaced in the proper position.
Auto Shut Off
It shuts off when the collector is full or when the collector is removed
or not replaced in the proper position. For some models, the fan
motor will continue to run for 30 seconds.
Wait 3 minutes before resuming operation
After the unit has stopped, its operation cannot restart for 3 minutes.
This happens to protect the unit. Operation will resume automatically
after 3 minutes.
Auto Defrost
When frost builds up on the evaporator coils, the compressor will
cycle off and the fan will continue to run until the frost disappears.
Auto-Restart
If the unit breaks off unexpectedly due to a power cut, it will restart
automatically with the previous function setting when power resumes.
23
EN
KDH4756

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido