Klarstein 10032113 Manual De Instrucciones página 22

EN
22
Use as a Contact Grill or Panini Press
1 Ensure the drip tray is correctly inserted into the grill.
2 Ensure the cooking plates are correctly inserted and securely locked into position.
3 Place the grill on a flat, dry surface. Ensure there is a minimum distance of 8 inches
(20cm) of space both sides of the appliance.
4 Unwind the power cord completely and insert the power plug into a grounded wall
outlet.
5 The grill alert will sound and the LCD screen will display OFF and the default
'0'zero time.
6 To preheat the grill: Ensure the top plate of the grill is closed. This will ensure
faster,more efficient preheating. Turn the temperature dial to adjust the temperature.
Rotate the dial (Low: 160-180°C, Panini: 180-205°C, Sear: 205-230°C) or
select and alternative temperature. The grill will start to heat and the LCD screen will
illuminate orange and display the selected temperature, HEATING and the default
'0' zero time. Allow the grill to preheat.
7 Once the grill has preheated to the selected temperature, the grill alert will sound and
HEATING will no longer flashes. The LCD screen will display the selected temperature
and the default '0' zero time.
8 To open the grill: Ensure the grill has completely preheated and the LCD screen no
longer displays HEATING. Ensure the top cooking plate is closed. The Adjustable
Height Control clip, located on the right side of the top plate, should be in the OPEN
position. Use the handle to open the top plate to a 90 degree position.
9 Place food on the bottom cooking plate.