Panel Descriptions - Tripp-Lite B302-4HX4H-4K Manual Del Propietário

Panel Descriptions

The following panels depict the 8x8 HDMI Matrix Switch/Splitter. It is identical to the 4x4 model, except with 4 more input and
output ports.
1
HDMI Inputs – Connect up to 8 HDMI source devices.
2
HDMI Outputs – Connect up to 8 HDMI display devices.
3
DC 12V – Connect the included 12V DC power supply.
4
RS-232 Port – Connect a PC or laptop to send RS-232 serial commands to the unit via terminal.
5
TCP/IP Port – Connect a PC or laptop via Cat6 cable to remotely control the unit via GUI.
6
IR EXT – Connect the included IR Receiver Cable for IR signal reception from the included IR Remote Control.
7
Audio Outputs – Connect up to 8 sets of speakers or amplifiers.
8
Power – Switch to turn the unit on and off.
9
LCD Screen – Displays the unit's information and settings.
10
In/Out Select – Let you mix and match any input to any output. Press "ALL" to send one input to all connected displays.
11
EDID Select – Let you set EDID information for the Input and Output ports.
12
Lock – Locks all front-panel buttons to prevent accidental changes. Press "LOCK" again to unlock buttons.
13
Enter – Press to confirm commands.
14
IR – IR signal receptor for the included remote control.
4 5 6
1
9 10
3
7
2
12
11 13 14
8
3