Camera Video Output
16
Connect either SDI or optical cables from your Studio Camera
to a production switcher or other device.
+12V POWER
HDMI IN
HDMI OUT
+12V POWER
HDMI IN
HDMI OUT
Connect the camera's SDI output to the HyperDeck's SDI
input and connect the HyperDeck's SDI output to the
camera's SDI input to view your recordings.
Camera Video Output
Connecting to Video Switchers
Blackmagic Studio Cameras output 10-bit 4:2:2 video so you can connect to broadcast switchers and
other SDI video equipment. Optical input and output means ATEM Camera Converters are not required
at the camera end.
You can easily view the Program (PGM) output from the switcher by connecting it to your Studio Camera's
SDI or optical fiber input.
Blackmagic Studio Camera also features a reference input which allows multiple cameras to be genlocked
to a blackburst or tri-level reference signal. Genlocking cameras, VTRs and other devices to an external
reference signal helps to eliminate timing errors which may result in the picture jumping when switching
between different sources.
Connecting to Recorders
If you simply wish to record your Studio Camera's output, you can connect the SDI output to the SDI input
of an SSD recorder such as the Blackmagic HyperDeck Shuttle. The SDI output from the HyperDeck can
then be connected to the Studio Camera's SDI input, so you can view your recordings on the camera's LCD.
SDI IN
SDI OUT
SDI IN
SDI OUT