Connections; Blackmagic Studio Camera - Left Side - Blackmagic Studio Camera Manual Del Usuario

Connections

8
Connections

Blackmagic Studio Camera - Left Side

LANC Remote Control
The remote port on your camera is used to remotely control lens focus, iris and zoom adjustments when
using a compatible lens. The port is a 2.5 mm stereo jack using the standard LANC protocol.
Active MFT lenses allow you to control the zoom servo with a LANC controller. The following lenses are
currently supported:
‚ Panasonic Lumix G X Vario PZ 14-42mm f/3.5-5.6 Power O.I.S. Lens
‚ Panasonic Lumix G X Vario PZ 45-175mm f/4.0-5.6 Zoom O.I.S. Lens
‚ Olympus M.Zuiko Digital ED 12-50mm f/3.5-6.3 EZ Micro 4/3 Lens
‚ Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6 EZ Micro 4/3 Lens
Headphones Output
For monitoring program and control room audio with aviation style headsets with "fixed wing" connectors.
Aviation headsets range from single ear models for use in studio environments to full size noise cancelling
models which are suitable for loud concerts or sporting events. Audio is taken from channel 15 and 16 of
the incoming SDI and optical fiber video. Channels 15 and 16 are rarely if ever used during production
and so are very suitable to serve for the audio talkback.
Headphones Microphone Input
1
For talking to the control room with aviation style headsets. Audio is embedded into channel 15 and 16
of the SDI and optical fiber output.
Audio Inputs
2
Two channels of professional balanced analog audio is supported via XLR connectors. Use the audio menu
to set the input levels for each channel. The inputs support both Mic level inputs and line level inputs
and the input type is also selected from the audio menu. Audio is embedded into Channel 1 and 2 of the
SDI stream.