Error Codes - Klarstein PRIME AIR Manual Del Usuario

Storage
Unplug the appliance from the wall outlet and allow it to cool completely. Clean
the unit thoroughly before storing. Store the unit in its original packaging in a
clean and dry place. Never store the unit when it is still hot or plugged in. Do not
put any load on the cable where it enters the unit as this may damage the cable.

ERROR CODES

If an error is detected, the unit beeps 5 times and stops operation. The LED screen
displays the corresponding error code.
Error code Possible cause
E1 Open circuit
E2 Short circuit
E3 Overheating
EN
21