Blumfeldt Climax Ambient Manual Del Usuario página 57

Step 2: Attach the male end (M) of the bar (B1) and the female end (W) of
the bar (C) to the power supply separately. Then tighten the screw caps
Step 3: Attach the power supply
to the beam (C) with the screws
(K5). Adjust the light color
according to the illumination
with the remote control (P).
20
on the end of the light cables.
(M) & (W) verbinden
(W)
(M)
Step 1: Connect end (M) of the light
cable of beam (B2) with end (W) of
the light cable of beam (C) and then
tighten the screw cap. Except for
the connection point of beam (B1)
and (C), the other light cables must
be connected in the same clockwise
way.
(W) (M)
EN
57