Care And Maintenance; Troubleshooting - Allen + Roth CO.VS200 Instrucciones De Ensamble

ASSEMBLY INSTRUCTIONS
7. Attach the faucet (I) separately as per the
instruction sheet provided and ensure there is no
leakage. Hand-tighten all plumbing fittings
(using a wrench for a 1/4 turn, if necessary).

CARE AND MAINTENANCE

Vanity Base:
• Dust the vanity frequently with a clean, soft and dry cloth.
Vanity Top:
• Clean only with non-abrasive cleaners or a mild detergent; do not use products such as Vim or
powder cleansers.
• For extremely stubborn stains, use a small amount of acetone on a cloth and gently rub out the stain.
• Do not place any sharp or abrasive objects on the bare surface of the top.
• Do not use water that exceeds a temperature of 140

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-866-439-9800,
8 a.m. - 8 p.m., EST, Monday - Friday.
PROBLEM
Vanity doors rub
against another
surface/there is a
large gap between
vanity doors.
POSSIBLE CAUSE
Floor is not level.
7
0 0
F/46 C.
CORRECTIVE ACTION
1. Use a shim to ensure the
vanity is level.
2. Adjust door hinges.
6
I