1. Connection to the network
1. Connection to the network
1.1 System requirements
1.1.1 Required equipment preparation
The following equipments are required to connect the projector to your computer
through the network.
ü Projector
ü LAN cable (to connect the projector to a network): CAT-5 or greater
ü Computer (minimum 1 set): equipped with the network feature
1.1.2 Hardware and software requirement for computer
To connect your computer to the projector and use the network function of the
projector, your computer needs to meet the following requirements.
ü OS: One of the following.
®
Windows
XP Home Edition /Professional Edition
Windows Vista
®
Windows
7 Starter /Home Basic /Home Premium /Professional /Ultimate /
Enterprise
ü CPU: Pentium 4 (2.8 GHz or higher)
ü Graphic card: 16 bit, XGA or higher
* When using the "LiveViewer" it is recommended that the display resolution of
your computer is set to 1024 x 768.
ü Memory: 512 MB or higher
ü Hard disk space: 100 MB or higher
ü Web browser: Internet Explorer
ü CD-ROM/DVD-ROM drive
NOTE
• The network communication control is disabled while the projector is
in standby mode if the STANDBY MODE item is set to SAVING. Please connect
the network communication to the projector after setting the STANDBY MODE
to NORMAL. (&SETUP menu in the Operating Guide)
• You can get the latest version of the applications for the network functions of
the projector and the latest information for this product from the website.
(http://www.christiedigital.com)
1.2 Quick connection
The "LiveViewer" supports very quick and simple connection to the network.
When making use of the network function, it is recommended that you install the
"LiveViewer" on your computer. For details, refer to the manual for "LiveViewer".
LX41/LW41 User Manual - Network Guide
(100Base-TX or 10Base-T)
®
Home Basic /Home Premium /Business /Ultimate /Enterprise
®
6.0 or higher
4
020-000508-01 Rev. 1 (06-2012)