Publicidad
10. With the fuse removed, attach the 3/8" ring terminal to the vehicles
positive (+) battery terminal.
Warning: Do not attempt to connect the black power wire to
the vehicle fuse panel or any other accessory wiring. Failure
to connect directly to the vehicle battery could cause vehicle
damage and/or trailer lighting failure.
11. Reattach the vehicles Negative (-) battery wire.
12. Place the 10 amp fuse into the fuse holder.
13. Confirm trailer harness operation with a test light or by using a properly
equipped trailer.
14. Mount the T-Connectors black box using the foam tape supplied. Secure
all wires using cable ties (provided).
15. Re-install any carpeting, trim panels, and the trunk threshold removed
in step 2.
Publicidad
