Specific Safety Rules - Craftsman 315.SS630 Manual Del Operador

Herramienta rociadora de pintura
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

 Keep guards in place and in working order. Never op-
erate the tool with any guard or cover removed. Make
sure all guards are operating properly before each use.
 To reduce the risk of injury, keep children and visitors
away. All visitors should wear safety glasses and be
kept a safe distance from work area.
 Keep the area of operation clear of all persons,
particularly small children, and pets.
 Use right tool. Don't force tool or attachment to do a
job it was not designed for. Don't use it for a purpose
not intended.
 Do not operate the equipment while barefoot or
when wearing sandals or similar lightweight foot-
wear. Wear protective footwear that will protect your
feet and improve your footing on slippery surfaces.
 Exercise caution to avoid slipping or falling.
 Always wear safety glasses with side shields. Every-
day eyeglasses have only impact-resistant lenses; they
are nOT safety glasses.
 Use only recommended accessories. The use of
improper accessories may cause risk of injury.
 Follow the maintenance instructions specified in
this manual.
 Check damaged parts. Before further use of the tool,
a guard or other part that is damaged should be care-
fully checked to determine that it will operate properly
and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may
affect its operation. A guard or other part that is dam-
aged must be properly repaired or replaced by an au-
thorized service center to avoid risk of personal injury.
 Never leave tool running unattended. Turn power
off. Don't leave tool until it comes to a complete stop.
 Be thoroughly familiar with controls. Know how to
stop the product and bleed pressure quickly.
 Keep tool dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products, or
any solvents to clean tool.
 Do not use tool if switch does not turn it off. Have
defective switches replaced by an authorized service
center.
 Before cleaning, repairing, or inspecting, shut off the
motor and make certain all moving parts have stopped.
All manuals and user guides at all-guides.com

SpECiFiC SaFETY RULES

4 - English
 avoid dangerous environment. Don't use in damp or
wet locations or expose to rain. Keep work area well lit.
 Never direct a paint stream toward people or pets,
or any electrical device.
 never start the machine if ice has formed in any part
of the equipment.
WaRninG:
high pressure spray can be dangerous
if subject to misuse. The spray must not be directed
at persons, animals, electrical devices, or the machine
itself.
 Keep away from hot parts.
 Check bolts and nuts for looseness before each use.
A loose bolt or nut may cause serious motor problems.
 Before storing, allow the product to cool.
 Store in a cool, well-ventilated area, safely away
from spark and/or flame-producing equipment.
 When servicing use only identical replacement
parts. Use of any other parts may create a hazard or
cause product damage.
 Never use the sprayer without a spray tip installed.
 an injection injury can lead to possible amputation.
See a physician immediately.
 Never put your hand in front of the spray tip when in
use. Gloves will not always provide protection against
an injection injury.
 Wear clothing to keep paint off skin and hair, along
with a mask or respirator during use. Paints, sol-
vents, and other materials can be harmful if inhaled or if
they come into contact with the body.
 Always shut the unit off, remove the battery pack,
and release pressure before servicing, cleaning the
tip or guard, changing the tip, or leaving unattended.
 plastic can cause sparks. never hang plastic to
enclose a spray area. Do not use plastic drop cloths
when spraying flammable materials.
 Do not spray outdoors on windy days.
 Do not attempt to clean or unclog the spray tip with
your finger.
 A battery operated tool with integral batteries or a
separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a
risk of fire when used with another battery.

Publicidad

Tabla de contenido
loading

Tabla de contenido